Please refer to the instruction manual included with your Airsoft gun for more detailed maintenance guidance

1. On single shot air soft guns do not leave the gun cocked while not in use.
   Alternatively for guns / rifles with different shooting modes, make sure the gun is switched to single shot mode when not in use.

2. Disconnect battery when not is use (if applicable).

3. Clean and lubricate your Airsoft gun with Airsoft Silicon Spray to protect from moisture (do not use WD-40).

4. Remove the magazine and switch the safety mechanism on.

5. For electronic airsoft guns, do not overcharge the battery and try to use up as much battery power as possible between charges.

6. To clear a jammed BB pellet from the barrel of your airsoft gun use the unjamming tool which came with your airsoft bb gun. Push the rod tool gently down the barrel to loosen the bb. Never look down the barrel to view the jammed bb. For best results spray airsoft silicon lubricant into the barrel. Do not attempt to remove the barrel or open the Airsoft BB gun as this will invalidate the warranty.

7. Never use cheap BB pellets. The use of poor quality, low grade BB pellets may cause damage to you airsoft gun and will invalidate the warranty. Geniestuff only sells high quality BB's